Ring Gauge


The ring gauge provides accurate measurement for smooth ring standards and supports bore proofreading for consistent performance in manufacturing and quality control. It is made from high-quality, durable materials for long-term use in calibration, and is suitable for checking inside diameters across a range of industry standards. The glossy finish improves visibility for easier reading and accurate measurements, supported by dedicated after-sales service.

Product Description

 

Smooth ring gauge: This is a type of gauge used to measure the outer diameter of a workpiece. It is divided into a T end and a Z end. When in use, the T end represents the upper limit dimension of the workpiece’s outer diameter and should pass through; the Z end represents the lower limit dimension of the workpiece’s outer diameter and must not pass through.

 

Our company produces gauge series including Thread Gauge (Metric, American, English, Trapezoidal) and Thread Plug Gauge, Thread Ring Gauge, Smooth Plug Gauge, Smooth Ring Gauge Trapezoidal), Plug Gauge, Smooth Ring Gauge, Card Gauge, Keyway Plug Gauge, Mohs Gauge, 7:24 Taper Gauge, Metric Taper Gauge, Sinusoidal Gauge, Inspection Rods (Mohs, 7:24, Metric), Cylindrical Angle Ruler, various non-standard checks and measuring instruments for thread inspection, coaxial checks, and other non-standard inspection instruments.

 

Ring Gauge Use

 

A ring gauge is a precision measuring tool used primarily in machining and quality control to measure the external dimensions of cylindrical components, such as shafts or bearings. It is designed to check both the size and roundness of these components to ensure they meet specified tolerance requirements. Ring gauges are commonly used in industries such as automotive, aerospace, and manufacturing, where maintaining precise dimensions is critical.

 

Ring gauges are available in two main types: Go/No-Go gauges and set-ring gauges. The Go/No-Go type is used for basic tolerance checking. It consists of two rings: a “Go” ring and a “No-Go” ring. The “Go” ring should fit the part, indicating that the component is within the desired size range, while the “No-Go” ring should not fit, indicating that the part exceeds the specified dimensions.

 

The set-ring gauge is used for more detailed measurement and calibration. This type consists of a precisely manufactured ring that acts as a reference standard against which the component being measured is compared. It helps verify that components maintain consistent size throughout production.

 

Ring gauges are made from materials with low expansion rates, such as steel or carbide, to help maintain precision even under changing temperature conditions. When using a ring gauge, it is important to handle it carefully to avoid damage, because even minor surface imperfections can affect measurement accuracy.

 

In summary, ring gauges are essential for high-precision measurement of cylindrical parts across a wide range of industries. Their use helps prevent defects, supports correct fit and function, and contributes to the overall quality and performance of mechanical systems.

 

What Are the Advantages of a Ring Gauge?

 

In manufacturing and engineering, ensuring precise measurements is fundamental to component quality and performance. One key tool that supports accurate measurement is the ring gauge. This specialized measuring instrument offers multiple benefits that improve productivity and strengthen quality assurance processes.

 

First, the primary advantage of a ring gauge is its ability to provide highly accurate measurements for cylindrical parts. Its design enables users to check a workpiece’s diameter effectively. Ring gauges are manufactured to tight tolerances, making them suitable for quality control in demanding environments. This precision helps ensure components fit correctly, reducing the likelihood of assembly issues.

 

Another major advantage is ease of use. Compared with more complex measuring instruments, ring gauges typically use a straightforward “go/no-go” inspection method. The gauge features two rings: a go ring that should fit onto the part and a no-go ring that should not. This binary approach enables fast inspection, allowing operators to quickly identify non-conforming parts without requiring intricate measurement setups.

 

In addition, ring gauges are highly durable and can withstand extensive use, resulting in a long service life and lower total cost over time. Many models are made from hard materials that resist wear and tear, making them well-suited for frequent daily checks in production environments.

 

Finally, integrating ring gauges into your quality control process can significantly improve overall manufacturing efficiency and reliability. Ensuring each produced piece meets the required specifications not only improves product quality, but also supports customer satisfaction and confidence.

 

In conclusion, the advantages of using a ring gauge include accuracy, user-friendliness, durability, and efficiency. By incorporating ring gauges into your manufacturing processes, you can strengthen quality control and help raise the overall standard of your products.

 

Product Detail Drawing

 
  • Read More About plain ring gauges
  • Read More About ring gauges for sale
  • Read More About ring gauges are used to check
  • Read More About plain ring gauges

 

Ring Gauge Specification

 

Smooth ring gauge

Reference standard: GB1957-81 DIN7162

Accuracy grade: h6 / h7 / h8 / h9

Unit: mm

1.8

16

34

62

120

2.0

17

35

65

125

2.5

18

36

68

130

3.0

19

37

70

135

3.5

20

38

72

150

4.0

21

39

75

165

4.5

22

40

80

180

5.0

23

42

82

200

6.0

24

44

85

220

7.0

25

45

88

240

8.0

26

46

90

250

9.0

27

47

92

260

10.0

28

48

95

280

11.0

29

50

98

300

12.0

30

52

100

 

13.0

31

55

105

 

14.0

32

58

110

 

15.0

33

60

115

 

STORAEN Ring Gauge Specification: Dual Standard Certified in Accordance with GB1957/DIN7162

 

STORAEN’s ring gauges are a testament to precision engineering, meticulously designed to comply with both GB1957 and DIN7162 international standards—two benchmarks of excellence in dimensional metrology. Engineered to achieve accuracy up to h6 class, these gauges serve as master ring gauges, setting the benchmark for bore diameter measurements in industries where precision is non-negotiable, from automotive manufacturing to aerospace engineering and industrial machinery production.

 

Crafted from premium-grade alloy steel, our steel ring gauges undergo a rigorous heat-treatment process to enhance hardness and resist wear, ensuring consistent performance even in demanding industrial environments. With a low thermal expansion coefficient, the material helps minimize errors caused by temperature fluctuations—a critical feature for maintaining reliability in global manufacturing settings. Each gauge features a polished surface finish to reduce friction during measurement and to protect against accidental scratches that could compromise accuracy.

 

Our product range includes both plain ring gauges for single-dimension inspections and ring gauge sets that bundle multiple sizes, ideal for workshops requiring versatile quality control solutions. Whether you need a gauge to verify the diameter of a precision-machined bearing or to calibrate the bore of a hydraulic component, STORAEN offers configurations aligned with your specific requirements. All gauges follow the Go/No-Go measurement principle: the “Go” end confirms a part’s dimensional conformity, while the “No-Go” end ensures it does not exceed allowable tolerances—streamlining inspection for improved efficiency.

 

The h6 class designation reflects our commitment to ultra-tight tolerances—typically within ±0.0005mm for nominal sizes up to 50mm—making our gauges suitable for applications requiring micron-level precision. This accuracy is validated through our in-house calibration laboratories, equipped with advanced interferometers and coordinate measuring machines (CMMs), to ensure each gauge meets or exceeds the strictest international tolerance standards. Each product is accompanied by a traceable calibration certificate, linking performance to national metrology standards for full compliance documentation.

 

For customers looking for ring gauges for sale, STORAEN provides a comprehensive specification table covering nominal sizes from 1.8mm to 300mm, with options for both metric and inch-based measurements. In addition to standard offerings, we provide custom solutions, including non-standard diameters, special surface coatings (such as chrome plating for enhanced corrosion resistance), and tailored ring gauge measurement systems for unique industrial applications. Our engineering team works closely with clients to design gauges that address specific challenges, from measuring deep bores in aerospace components to inspecting the inner diameters of miniature medical devices.

 

Choosing STORAEN means investing in more than just a tool—you gain a partner in quality assurance. Our ring gauges for sale are backed by a lifetime warranty against material defects, along with access to our global technical support network. Whether you are a small machine shop or a large-scale manufacturer, our products deliver the reliability and precision required to maintain production efficiency and reduce costly rework. Rely on STORAEN’s decades of metrology expertise: our gauges are not merely instruments—they form the foundation of your quality control framework.

 

STORAEN's After-sales System for Inspection Tools: Full-cycle Guarantee from Standard Products to Non-customized Inspection Tools

 

STORAEN’s after-sales system for ring gauges is more than a service—it is a commitment to ensuring your measurement tools deliver consistent precision throughout their lifecycle. Whether you have purchased our standard ring gauge products or worked with us on non-custom inspection tools, we provide end-to-end support covering calibration, maintenance, and technical expertise, reinforcing our role as your trusted partner in quality control.

 

For customers purchasing ring gauges for sale from our standard range—including plain ring gauges, ring gauge sets, and master ring gauges—we begin with traceable calibration certificates that validate compliance with GB1957, DIN7162, and international ring gauge class standards (up to h6 precision). Our global service centers offer annual recalibration services using state-of-the-art interferometers to ensure gauges maintain accuracy even after years of use. This is especially important in industries such as aerospace and automotive, where ring gauge measurement reliability directly affects production quality and compliance documentation.

 

For non-custom non-standard inspection tools, our engineering team provides tailored support from design through deployment. If your application requires a steel ring gauge with specialized coatings, extended size ranges, or custom tolerance specifications, we offer post-purchase modifications and retrofitting services. Our technicians work closely with your team to troubleshoot measurement challenges—whether it is optimizing a ring gauge set for high-volume production lines or resolving compatibility issues in complex machining environments.

 

Every STORAEN ring gauge, regardless of type, comes with a lifetime warranty against material defects, reflecting our confidence in the durability of our steel and carbide constructions. For wear and tear resulting from normal use, we provide cost-effective repair solutions, including surface reconditioning for polished finishes and dimensional revalidation for gauges exposed to extreme working conditions. Our objective is to extend the operational life of your tools, reduce replacement costs, and maintain the precision your processes depend on.

 

Technical support is central to our after-sales approach. Our 24/7 customer service team—staffed by metrology experts—offers remote troubleshooting for measurement discrepancies, helping you distinguish between tool-related issues and process errors. We also provide free instructional resources, such as video guides on proper ring gauge handling, storage best practices to prevent corrosion, and tips for integrating gauges into automated quality control systems.

 

Choosing STORAEN gives you peace of mind through an after-sales ecosystem focused on your operational efficiency. Whether you use a single plain ring gauge for basic inspections or a complex master ring gauge for ISO certification audits, our support scales with your needs. We do not only sell tools—we help ensure they remain critical assets in your quality assurance framework, supported by the expertise and resources of a global leader in precision metrology. Trust STORAEN to keep your measurements accurate, your processes compliant, and your business moving forward—today and for years to come.

On-site pictures

 
  • Read More About plain ring gauges
  • Read More About plain ring gauges
  • Read More About plug and ring gauges

Request a quote